->Case
CPU
Memory
Motherboard
Power Supply
Drives
Video Card

Install

Computer Case

Prepare your case

Let's take a look at the case first, this part is quite easy.

Look at the image, if you think you can mount the motherboard and work with your PC and the power supply, then go ahead, if not then remove the power supply.

Now just lay down the case cause we'll begin working with it soon after we finish with our motherboard. If it seems to have dust, please clean it out with water and a piece of cloth or if you have to air compressor, much better.

Punch out the holes if needed

The back of your case must be ridden of the default back panel, just remove it completely as shown below. Don't worry you will replace the panel with that came with your motherboard, just look and see if you have it.

Don't take out all the PCI slots

Please don't take out all the PCI, just the ones that you are going to use, like video card, sound card, tuner.

Finished?

For now, we've done good to prepare our case and we can proceed to the next step which it's gonna be mounting the cpu to the motherboard.

Guides